Parallel and series mechanical mods are two different types of mechanical vaping devices that differ in how they connect the batteries to the atomizer. Parallel mechanical mods have two or more batteries that are connected to the device side-by-side, so the voltage is the same across each battery. The current is split between the batteries, resulting in longer battery life and higher amp limits. With parallel configuration, if one battery fails, the other(s) continue to power the device. This can be beneficial for cloud chasing and sub-ohm builds that require high wattages.
On the other hand, series mechanical mods have two or more batteries that are connected end-to-end, so the voltage output is the sum of each battery. The current remains the same across all batteries, but the voltage is doubled or tripled, depending on the number of batteries used. The resulting higher voltage output can provide more power to the atomizer, which can lead to bigger vapor production and stronger flavor. However, if one battery fails, the device will stop functioning.
Mechanical mods are one of the greatest inventions in the vape industry. They provide you with the most powerful hit out of the battery to get ultimate good vape from your low resistance coils. Most mechanical mods hold one battery while the others hold two. Before you buy a dual-battery mechanical mod, there is one thing you should know, that’s the difference between parallel and series mechanical mods.
One of the difference is voltage. If the dual-battery connect in a way of parallel, the voltage don’t change but the battery capacity and the output current are double, which means the device can either last for double time or output double current. Parallel dual-battery are usually used at high-wattage mods. The series mod is on the opposite, you can get double voltage but the the battery capacity and the output current don’t change.
Take two identical 18650 batteries for example, they come with 3.7 volts, 2000mAh capacity and max continuous discharge rating of 20A. In a parallel mod you can get up to 40A of the max current, and the capacity is 4000mAh but the voltage is still 3.7V. But in a series mod you can get 7.4V voltage but the max current and the capacity don’t change.
Parallel and series mechanical mods, which one is best for you?
Whether to choose parallel or series mechanical mods depends on your preference.
If you usually use low wattage and single-wire coils device, and you are looking for longer run-time, then I think you should pick the parallel mod. It’s safe and you can use you device for a longer time.
If you prefer high-wattage device and addicted to making a mass of clouds, the parallel can’t fit you any more. Because the higher-voltage series mod can provide the necessary current also. A series mod can easily drive a larger wire mass. Besides, it heats the coil more quickly. But you should be careful of battery limits.
Overall, parallel mechanical mods offer longer battery life, lower amp draw, and more safety as they continue to work if one battery fails. Series mechanical mods provide higher voltage output, stronger vapor production and flavor, but battery life is reduced, and there is no protection if one battery fails. It’s important to use the correct batteries for each device and to follow proper safety guidelines to avoid accidents.